CNN Video: Brilliant Light Power's SunCell

CNN's announcement of the SunCell, the world's new energy source that releases massive power by conversion of hydrogen to dark matter. Brilliant Light Power is working towards commercialization in 2018, leasing SunCells of 150 kW capacity at prices that will enable the user to have electricity at 2.5 cents a kW hr.

Engineering.com video: 
One Million Watts in the Palm of Your Hand?

Brilliant Light Power's new Hydrino energy source might change everything we think about power generation and dark energy.

brilliantlightpower.com    


Press Release – July 11, 2016
CRANBURY, N.J.-- Brilliant Light Power, Inc. (BrLP) announced today that it has continuously generated over a million watts of power from a new primary source until the cell vaporized from the intense heat. The power released by the conversion of hydrogen atoms from water molecules into a lower energy form called “Hydrino” or dark matter is manifest as brilliant-light emitting plasma wherein the light is uniquely and extraordinarily essentially all high-energy light in the extreme ultraviolet. Using four cross-confirming methodologies, five validators have confirmed over a million watts of plasma power developed by BrLP’s so-called SunCell® at power gains of over 100 times the power to ignite the Hydrino reaction, and at power densities higher than any previously known energy source. Dr. Randy Booker, physics professor and former Physics Department Chairman at University of North Carolina-Ashville said, “The power was measured using two optical power measurements involving three sophisticated spectrometers calibrated against a National Institute of Science and Technology traceable standard and two thermal methods involving a commercial calorimeter and the rate of the rise of the water coolant temperature of the SunCell®. All four methodologies cross-confirmed the production of megawatt scale power that was continuous in the case of the SunCell® with spectacular commercial potential. Moreover, the unique and characteristic spectrum from the optical tests of essentially purely high energy light emission over a predicted range confirms the hydrino reaction as the source of the power.”

“Transportation technology has relied on burning something – oil, coal, natural gas, for over a century. The transition to alternative energy is often considered a niche, futuristic, and even inconsequential solution. The SunCell® presents the possibilities to make this transition to a new energy era a reality.”

BrLP subsequently held an invitation demonstration event on June 28, 2016 for about 50 guests from industry and academia wherein BrLP presented live demonstrations of the enormous power density and power gain by multiple methods. BrLP also presented an engineered SunCell® prototype having no moving parts that it believes is capable of producing 125 kW of electricity. BrLP anticipates having field trials in 2017 supported by several current engineering firm and manufacturer partners. It comprises refractory materials capable of the intense heat wherein the SunCell’s® enormous power density heats a blackbody radiator to incandescent temperatures to produce the effect of thousands of halogen light bulbs, and the light is converted to electricity with so-called concentrator photovoltaic cells that receive the light from the blackbody radiator and operate at incident light intensities of over one thousand times that of sunlight. Details of the SunCell®, the BlackLight Process, the video and slide presentation from the June 28, 2016 demonstrations, background theory, journal publications, and other support materials are available on the BrLP webpage (http://brilliantlightpower.com).

BrLP’s safe, non-polluting power-producing system catalytically converts the hydrogen of the H2O-based solid fuel into a non-polluting product, Hydrino, by allowing the electrons to fall to smaller radii around the nucleus. The energy release is over 200 times that of burning the equivalent amount of hydrogen with oxygen. Due to this extraordinary energy release, H2O may serve as the source of hydrogen fuel to form Hydrinos and oxygen. Moreover, the SunCell® is compact, light-weight and autonomous with a projected capital cost of 1% to 10% that of any other form of power. The anticipated cost is so low that BrLP intends to provide autonomous individual power for essentially all stationary and motive applications untethered to the grid or any fuels infrastructure. Dr. Mills announced, “This is the end of the age of fire, the internal combustion engine, and centralized power and fuels.”

“The commercial potential for SunCell® technology is enormous. The promise of a cheap, clean and unlimited source of electric power is on the verge of commercialization. SunCell® components are based on well-known technologies from electrical lighting, photovoltaic, semiconductor, refractory and aerospace industries, and use widely available materials. What is new is Brilliant Light Power’s theoretical and experimental breakthroughs, protected by patents and proprietary know-how. Albert Einstein is looking down, smiling: I told you so, He does not play dice,” said Former World Bank manager Gerhard Pohl. Dr. Joseph Renick, former Chief Scientist at Applied Research Associates added, “It is understandable why even the best of scientists have difficulty taking seriously that which has been accomplished by Dr. Mills and his team at Brilliant Light Power because of how completely it transforms our understanding of atomic and molecular structure, dispels all of the strangeness associated with quantum theory so cherished by quantum physicists and chemists and then to boot delivers to mankind a new source of essentially unlimited inexpensive clean energy. The novel techniques, materials and processes developed by BrLP in the last few years are making this new source of energy a reality for all of mankind. The rest, however painful it will be for many in the natural sciences, will follow.”

One of the validators, Bucknell Professor Dr. Peter Mark Jansson PE remarked, “An objective review of the progress BrLP has made over the past decade in the development of their proprietary hydrogen-based technology indicates that they have achieved an understanding of the fundamental parameters that must be controlled to create a sustainable and energetic reaction of their atomic hydrogen fuel and catalysts. They have made landmark progress in creating demonstration devices that prove the concept of their generation technology with promise of becoming continuously operating prototypes in the near future. The creation of these consistently replicable experiments where input power is multiplied by 65 to 150 times is a remarkable achievement. The input power for these respective experiments was 8.02 kW and 10.45 kW with corresponding output power peaks reaching as high as 521 kW and 1.56 MW. Although these energy bursts were on the order of 1 to 3 minutes in duration I was able to observe a more continuous, sustainable reaction experiment that lasted over 7 minutes, other validators were able to observe operating SunCells® for over 30 minutes in duration.” Dr. K.V. Ramanujachary, Rowan University Meritorious Professor of Chemistry and Material Science, added that from his independent tests he finds, “the developments truly impressive and extremely important. I believe that the technology is amenable for making large-scale devices as easily as a portable one. This is what makes it very attractive.”

Regarding the versatility of power and unsurpassed logistical advantages, David Bennett, former Proterra CEO and former President of Eaton Vehicle Group, Asia Pacific said, “Transportation technology has relied on burning something – oil, coal, natural gas, for over a century. The transition to alternative energy is often considered a niche, futuristic, and even inconsequential solution. The SunCell® presents the possibilities to make this transition to a new energy era a reality.” He further emphasized, “The SunCell® is a relatively simple system that catalytically converts water-based fuel directly into brilliant light that is converted to electricity using existing photovoltaic technology. Initial testing indicates mega-watt power potential, which would radically transform energy technology. The SunCell® presents a solution to the clean energy challenge of our lifetime.”


About Brilliant Light Power

Brilliant Light Power, Inc. is the inventor of a new primary energy source applicable to essentially all power applications such as thermal, electrical, automotive, trucking, rail, marine, aviation, aerospace, and defense. The BlackLight Process, the power source, is the process of releasing the latent energy of the hydrogen atom by forming Hydrinos. The SunCell® cell was invented by Dr. Mills to release this energy directly as electricity from water as the only source of fuel.


Glossary:

BlackLight Process: A novel chemical process invented by Dr. Mills causing the latent energy stored in the hydrogen atom to be released as a new primary energy source.

Hydrino: Hydrinos are a new form of hydrogen theoretically predicted by Dr. Mills and produced and characterized by BrLP. Hydrinos are produced during the BlackLight Process as energy is released from the hydrogen atom as the electron transitions to a lower-energy state resulting in a smaller radius hydrogen atom. The identity of the dark matter of the universe as Hydrinos is supported by BlackLight’s spectroscopic and analytical results as well as astrophysical observations.

SunCell®: The SunCell® comprises six fundamental low-maintenance commercially available systems, some having no moving parts and capable of operating for a decade or more: (i) a start-up inductively coupled heater to first melt silver; (ii) a gas injector to inject hydrogen derived from water and an injection system comprising an electromagnetic pump to inject molten silver and a very stable solid source of oxygen that reacts with the hydrogen to form the hydrogen to Hydrino catalyst; (iii) an ignition system to produce a low-voltage, high current flow across a pair of electrodes into which the molten metal and fuel are injected to form a brilliant light-emitting plasma; (iv) a blackbody radiator heated to incandescent temperature by the plasma; (v) a light to electricity converter comprising so-called concentrator photovoltaic cells that receive light from the blackbody radiator and operate at light intensity of over one thousand Suns; and (vi) a fuel recovery and a thermal management system that causes the molten metal to return to the injection system following ignition.

Photovoltaic or Solar Cell: Each cell comprises a flat panel of a semiconductor material that exhibits the photovoltaic effect, a method of generating electrical power by converting radiation such as solar radiation into direct current electricity. Light absorption in the semiconductor material creates energized charge carriers of opposite polarity that are collected at corresponding negative and positive electrode contacts on opposite sides of the flat panel to create a voltage that can deliver power to an external load.

Contacts
Brilliant Light Power, Inc.
Lynn Kline, Assistant for Dr. Randell L. Mills
Phone: 609-490-1090 Ext. 125
lkline@brilliantlightpower.com